With the continuous development of urban construction in China, diesel generating set, as an ideal power equipment for emergency power supply, is widely used by post and telecommunications, airports, banks, hotels and other departments. However, the noise transmitted by the diesel engine working state to the surrounding area seriously affects the life and rest of the residents. Noise as a physical pollution, and because of its regional, random, sensory three characteristics of pollution, directly for people to feel and understanding, with the development of social economy and human environmental awareness of noise pollution has been widely paid attention and attention. To this end, comler generator company specializes in developing and manufacturing a low-noise diesel generating set suitable for people's surrounding environment.
The use of low noise diesel generating sets is generally required to run continuously, and the machine itself will be hot when the machine runs continuously, and it needs to be cooled to the machine.
What do we need to pay attention to when we discharge water?
When the water is released, the temperature of the external environment of the low noise diesel generator is too low, so the cooling water should be discharged when the water temperature drops after 15 minutes after the shutdown, and it is not said that a shutdown will be discharged, otherwise the temperature difference between the fuselage and the external environment will be too large to cause the low noise. Some parts of the diesel generating set are deformed, thus affecting the performance of the diesel engine.
As for the release of water when the release switch can not be opened, it does not go to the tube, but in the surrounding attention to observe the specific conditions of water flow, mainly to see whether the flow is smooth, see whether the flow is smaller or when the time is slow. If these conditions, it is to show that the cooling water contains impurities, impeding the normal outflow of water, at this time the best way is to remove the water switch off, so that the cooling water directly from the body flow out. If it is found that the water is still not smooth, then the hard and slender steel items such as wire should be used to dredge until the flow is unblocked.
Finally, when the cooling water stops flowing out, we'd better shake the low noise diesel generating set a few more cycles so that the remaining water, the cooling water that is not easy to flow out of the diesel engine, can be cleaned by the diesel engine. After the end of the water release, the release switch should be in the open state in order to prevent the cooling water from running out and freezing. The corresponding parts of the diesel engine cause unnecessary losses.
If the cooling water of the diesel engine is discharged fully, we should pay attention to the discharge steps. It is necessary to ensure that the cooling water of the centimeter is discharged at one time, so as to avoid the unnecessary loss of the residual water inside the diesel engine, so as to ensure that the machine can have unnecessary trouble in the future use.
